VLF 0.1Hz 40kV Very Low Frequency AC Hipot Test Set for Power Cable
Product Name:
Very Low Frequency Tester VLF-40
Equipment Description:
The VLF testers (Generator) are suitable for Testing cables,
transformers, switchgear,Rotating machinery, and
other electrical apparatus.
Main Functions:
1. Easiest to use Fully automatic microcontroller
2. Built-in printer
3. True sine wave output
4. Real-time display of actual output waveform
5. Ergonomic, menu guided, large backlit LCD
6. Storage of test results for later retrieval and print.
7. Over voltage and current protected
8. Variable frequency 0.1Hz, 0.05Hz, 0.02 Hz
9. Data of current, voltage and waveform directly sampled at HV
side.
10. AC testing does not degrade good cable insulation
11. Harmful space charges are not injected into the cable
insulation
12. No traveling waves are generated during testing
13. Rugged and reliable design less prone to failure from
transients
Type
| Output
Voltage/Current | Load Capacity | Control Unit | Booster | Fuse Tube |
Frequency/Capacitance
| Dim.
(cm) | Wt
(kg) | Dim.
(cm) | Wt
(kg) |
VLF-30/1.1 | 30KV/20mA | 0.1Hz ≤ 1.1uF
0.05Hz ≤ 2.2uF
0.02Hz ≤ 5.5uF | 28× 37× 22 | 4 | 33× 18× 34 | 25 | 5A |
VLF-40/1.1 | 40KV/30mA | 0.1Hz ≤ 1.1uF
0.05Hz ≤ 2.2uF
0.02Hz ≤ 5.5uF | 28× 37× 22 | 4 | 35× 20× 36 | 35 | 6A |
VLF-50/1.1 | 50KV/40mA | 0.1Hz ≤ 1.1uF
0.05Hz ≤ 2.2uF
0.02Hz ≤ 5.5uF | 28× 37× 22 | 4 | 37× 24× 39 | 45 | 7A |
VLF-60/1.1 | 60KV/50mA | 0.1Hz ≤ 1.1uF
0.05Hz ≤ 2.2uF
0.02Hz ≤ 5.5uF | 28× 37× 22 | 4 | 33× 18× 34
33× 18× 34 | 25+25 | 10A |
VLF-70/0.5 | 70KV/55mA | 0.1 Hz, ≤ 0.5µ F
0.05Hz, ≤ 1.0µ F
0.02Hz, ≤ 2.5µ F | 28× 37× 22 | 4 |
33× 18× 34
35× 20× 36
| 25+35 | 10A |
VLF-80/0.5 | 80KV/60mA | 0.1 Hz, ≤ 0.5µ F
0.05Hz, ≤ 1.0µ F
0.02Hz, ≤ 2.5µ F | 28× 37× 22 | 4 | 33× 18× 34
37× 24× 39 | 25+45 | 12A |
Technical Parameters:
1. Input: 220 ± 10% Volts AC, 50/60 Hz, single phase.
2. Output-Voltage. 30KV
3. Output frequency: 0.1Hz, 0.05Hz, 0.02Hz.
4. Stability of frequency: Fluctuation < 0.5%
5. Measurement accuracy: ± 3%.
6. Positive and negative voltage peak errors: ≤ 3%.
7. Voltage waveform distortion: ≤ 5%
8. Construction: In two units: Controller and Booster...
9. Ambient conditions of use: Temperature Indoor and outdoor: -10ºC
to + 50ºC.
10. Humidity: ≤ 85%
